Services

⭐ WYSHTECH AIRSOFT — UPGRADE & REPAIR SERVICES

Professional AEG Diagnostics, Repairs & Custom Builds

Wyshtech provides complete AEG tech services for players nationwide and locally in Kalispell. Whether you need a repair, a performance upgrade, or a full custom build, you’ll get precision work backed by decades of experience.

🔧 1. BASIC AEG TUNE-UP — $50 + Shipping

A complete reliability refresh and performance evaluation.

Includes Full 11-Point Inspection

Gear condition
Piston teeth & O-ring seal
Motor & pinion wear
Cylinder compression
Wiring & connectors
Hop-up alignment
Bucking condition
Bearings/Bushings
Inner barrel
External fit & alignment

Maintenance Performed

Clean & re-lubricate internal components
Basic re-shim (only if needed)
Clean motor + pinion
Clean barrel + bucking
Final QC + chrono test

Best For: Reliability issues, inconsistent FPS, noisy gearboxes, or overdue maintenance.

🛠️ 2. AEG REPAIR SERVICE — $50 + Parts + Shipping

For replicas that fail, jam, lock up, or misfeed.

Covers issues such as:

Stripped pistons or gears
Locked gearboxes
Compression loss
Inconsistent FPS
Hop-up problems
Electrical/ETU faults
Motor failures

Additional labor: +$25/hour only if repair exceeds 1 hour.
Most repair parts stocked in-store for quick turnaround.

⚡ 3. CUSTOM AEG BUILDS — Starting at $150 Labor + Parts + Shipping

High-performance builds tailored to your playstyle, field limits, and expectations.

Wyshtech custom builds are fully engineered performance upgrades designed around your goals — whether you want maximum reliability, snappy semi-response, high RPS, or a long-range precision setup.

Typical Build Costs

Total build range: $300 – $700+
Labor cost: Starts at $150 (average 5 hours)
Final cost depends on:
- Build type (DMR, SSG, DSG, Standard AEG, etc.)
- Brushless vs brushed motors
- Gearset requirements to achieve expectations
- Compression parts
- Hop-up and barrel components
- ETU/MOSFET installation/programming
- Additional troubleshooting or tuning

What Every Custom Build Includes

Full gearbox tear-down & rebuild
Professional shimming
Motor pairing to proper gear ratio
AOE Correction (if needed)
Air seal & compression optimization
Air Volume ratio optimization (based on your preferred bb weight)
Hop-up + barrel fitting
ETU/MOSFET installation & programming
RPS/Joule tuning per your field rules
FPS/Joule chrono test
Feeding and reliability test
Range testing (to ensure replica shoots as expected)
Sound check & cycle analysis
Complete QC verification

Choose the Right Build Type

Review the full guide comparing DMR AEGs, HPA DMRs, DSG builds, High-Speed SSG, and Standard AEGs.

🔗 AEG & HPA Build Philosophy Guide
https://wyshtech.com/pages/wyshtechs-aeg-hpa-build-philosophy

Ready to Begin Your Build?

Submit the official build request form:

🔗 Custom Build Request Form
https://bit.ly/BuildFormRequest

⚙️ 4. STANDALONE SERVICES

ETU Install Only — $50 + Cost of ETU

(Perun, Jefftron, Gate, T238, etc.)

Deans (T-Plug) Conversion — $10

Quick Fixes (10 Minutes or Less) — FREE (In-Store Only)

Examples:

Motor height adjustment
Pinion tightening
Minor hop-up correction
Magazine/feed check
Small wiring reseat

HPA Tank Refill — $6

🔄 HOW THE PROCESS WORKS

A clear, no-hassle workflow from start to finish.

1. Contact or Submit Form

You reach out via Discord, email, or the Custom Build Form.
We discuss your goals, your field’s limits, and your budget.

2. Initial Evaluation / Quote

I give you a cost estimate based on labor + recommended parts.
Nothing starts until you approve.

3. Ship or Drop Off Your AEG

You either bring the replica to the store or ship it to Wyshtech.
(Shipping instructions provided after the quote is approved.)

4. Diagnostic & Disassembly

I perform a full inspection and confirm:

What needs to be replaced
What can be reused
If the quote needs adjustments
You’re notified before anything unexpected is done.

5. Repair or Build Work Begins

I perform the tech work, take photos/video if needed, and test everything during assembly.

6. Final Testing & QC

Every build gets:

FPS/Joule chrono test
RPS test (if relevant)
Feeding test
Compression check
Sound check
Safety verification
Results are recorded for your peace of mind.

7. Payment & Return Shipping

Once the work is complete, I send the final invoice.
After payment, your AEG is securely packed and shipped back to you.

🛡️ WYSHTECH WARRANTY

Honest, realistic, and built around professional standards.

Warranty Coverage (30 Days)

Wyshtech covers labor-related issues for 30 days after you receive your AEG.
This includes any failure caused by:

Improper shimming
Incorrect assembly
Installation errors
Misalignment or timing issues

If the problem is my fault, labor is free to fix it.

Warranty Does NOT Cover:

Wear-and-tear from high-RPS builds
Failures caused by user modification after service
Damage from incorrect battery usage
Over-voltage use (ex: 11.1V on builds not meant for it)
Physical damage, drops, water exposure
Field misuse (overshooting, dry firing excessively, etc.)
Failures caused by external parts not installed by Wyshtech
Springs and buckings (consumable items)

Brushless Motors Notice:

Programmable brushless motors (Solink / Warhead / T238) must be operated within their configured limits.
Damage caused by incorrect programming or abuse is not covered.

Shipping Costs:

Return shipping is the customer’s responsibility unless the failure is confirmed to be my mistake.

📞 NOT SURE WHAT YOU NEED?

I can help diagnose issues and recommend the best service based on your budget, field rules, and performance goals.

Button: Contact Us

🌐 JOIN THE WYSHTECH COMMUNITY

Tech help, Q&A, build showcases, and upgrade discussions happen daily:

🔗 Discord: https://bit.ly/WyshtechDiscord1